SIM2600M Series: A Guide to Demo Board Evaluation and Phase Advance Angle Tuning
About the SIM2600M Series
The SIM2600M series are high voltage 3-phase motor drivers driven by a sinusoidal control, which can support Hall element and Hall IC inputs, thus offering high-efficient yet low-noise motor control.
Supplied in a package, where a controller,a gate driver, the output transistors of three phases, and bootstrap diodes are highly integrated, the SIM2600M series requires only a few external components for building a motor driver.
This also allows a motor driver to be highly reliable in performance and design-friendly with its compactness.
These products can optimally control the inverter systems of low- to medium-capacity motors that require universal input standards.
For details, please refer to the individual product pages and the datasheets posted there.
SIM2602M
Development Tool
| Tool Name | File / Link | Ver. | Updated |
|---|---|---|---|
| GUI for Phase Advance Angle Tuning | 1.7 | 2021.9.14 | |
| Power Loss Calculation Tool | DT0052（SIM2602M） | ― | ― |
Application Note
| File Name | File | Rev. | Updated |
|---|---|---|---|
| A Guide to Demo Board Evaluation and Phase Advance Angle Tuning (AN0019) | Download(1.72MB) | 1.4 | 2022.11.10 |
Videos
The following videos show how to evaluate the demo board equipped with the SIM2600M series, and how to tune the phase advance angle using the GUI.
Please refer to the A Guide to Demo Board Evaluation and Phase Advance Angle Tuning (AN0019) along with the video.
Video List
| Settings | Application Note Section | Contents | Video |
|---|---|---|---|
| Connecting Devices | Sec. 2.2 | ・Connecting the PC and demo board ・Checking the status of communication |
Video-1 |
| Checking the Motor Operation | Sec. 2.3 | ・Connecting motors, power supply, devices ・Checking the motor operation |
Video-2 |
| Auto Tuning of the Phase Advance Angle | Sec. 3.1 | ・Connecting the devices ・Setting the GUI ・Auto tuning |
Video-3 |
| Semi Auto Tuning of the Phase Advance Angle | Sec. 3.2 | ・Connecting the devices ・Setting the GUI ・Semi auto tuning |
Video-4 |
1. Connecting Devices
(Application Note Section 2.2)
Contents
・Connecting the PC and demo board
・Checking the status of communication
Return to Video List
2. Checking the Motor Operation
(Application Note Section 2.3)
Contents
・Connecting motors, power supply, devices
・Checking the motor operation
Return to Video List
3. Auto Tuning of the Phase Advance Angle
(Application Note Section 3.1)
Contents
・Connecting the devices
・Setting the GUI
・Auto tuning
Return to Video List
4. Semi Auto Tuning of the Phase Advance Angle
(Application Note Section 3.2)
Contents
・Connecting the devices
・Setting the GUI
・Semi auto tuning
Return to Video List
Contact Us
Click below to contact us about product purchases and demo boards.Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.